LOSMANDY ASCOM DRIVER DOWNLOAD

Locking knobs can be loosened so the movement of the azimuth control knob is smooth and effortless. If you still get the same error message, try other values until the communication with the telescope works properly. If position requests are too frequent for the power of the machine running C2A, the controller saturates and causes this error message. Get an alert when the product is in stock: Losmandy is highly regarded for their innovative mechanical designs.

Uploader: Goltijar
Date Added: 2 January 2013
File Size: 56.30 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 5297
Price: Free* [*Free Regsitration Required]

Dual supported, ball bearing housed ground High Precision Brass Worm. In this dialog box, click the Update button for a list of valid llosmandy returned by the driver.

Vixen SkySensor 6. For full instructions on using this driver, please refer to the “readme” file included in the ZIP package or the AstroArt web site at www.

Please contact Explore Scientific for more information. Added non-precision pulse-guiding option 3. Note that this driver requires SkyMap Pro 6 or later. Laser engraved latitude scale in 2 degree increments. Show the telescope’s position with a cross-hair cursor on the map. This version has passed the Conformance Checker tests and has support for programmably changing pier side. You can try different speeds. You can re-centre the map automatically on the telescope position with the command Go to Telescope Position in the Telescope menu.

  HINOTE CD DRIVER

If position requests are too frequent for the power of the machine running C2A, the controller saturates and causes this error message.

The figure below shows the two types of buttons: The only way to recover from this is to power off the telescope, then switch it back on and re-do the alignment procedure.

If you still get the same error message, try other values until the communication with the telescope works properly. For example, select pointing.

When you press the arrow button with the left mouse button in one of the movement directions, the telescope will continue to move until the button is released. Losmandy has always been slow in providing support updates.

Click OK to close the options box. The position of the telescope is continuously indicated in the C2A map by a green circle. You must use this driver; the standard Meade LX driver will not work correctly with the Skysensor This is a full-featured driver that provides not only ASCOM standard driver functions, but also user access to many of the Temma’s special features.

Losmandy G11 G Mount

You could download this from the Losmandy site but alas none for the Gemini 2 yet! Note that you do not have to re-enter these values every time, because C2A remembers them for the next session. For more information see Working with TheSky section 1. In the hand controller, click the button Options Another click on the same button or a click on the hand controller stop button stops movement.

  IEEE1394 AND RAW1394 DRIVER

Slew the telescope to point at any desired target. The driver has also passed the Conformance Checker tests see this report. To do this, just check the option Continuous target tracking in the Telescope menu.

Telescope/Mount Drivers

This driver provides the following functionality: When asked to slew to a target, the telescope will sometimes continue slewing forever. Locking knobs can be loosened so the movement of the azimuth control knob is smooth and effortless.

Set the Skysensor’s latitude, longitude and time zone to the values on the current SkyMap Pro map. All requests for position and commands sent to the telescope are managed by a controller in C2A. While not complete functionality e.